Choose your control mode
V/f, sensorless vector and torque control give you options to match the motor and process.
V/f · SVC · TORQUEAE300 SERIES / AC DRIVES
Control motion.
Drive possibility.
Versatile motor control, from the keypad to your production line. Discover the AE300 series with sensorless vector control, built-in PID and Modbus connectivity.
Two enclosure designs across the AE300 range
ENGINEERED FOR CONTROL
AE300 SERIESEnclosure varies by model
150%
Starting torque at 0.5 Hz · SVC
±0.5%
Speed control precision · SVC
16 steps
Built-in PLC speed operation
RS485
Modbus RTU communication
01 / THE PRODUCT RANGE
Find your drive.
Choose a product family, then narrow the range by input code.
PRODUCT SERIES
Select 2–3 models on the cards to compare. Your picks stay selected when you change filters.
Side-by-side comparison
Showing only the models you selected.
Featured ratings use G-model values from the AE300 user manual, Table 2-1 (printed pages 7–8). Input voltage tolerance: ±15%. Confirm the nameplate and motor requirements before selection.
02 / CONTROL THAT CONNECTS
One drive.
Multiple ways
to take control.
Set up at the keypad. Integrate through terminals. Connect to your control network.
Explore the technical detailsKeep the process in balance
Built-in PID supports closed-loop control of process variables such as pressure, temperature and flow.
BUILT-IN PIDConnect with your system
Use the RS485 interface and Modbus RTU protocol for serial communication control.
RS485 / MODBUS RTU03 / UNDER THE SURFACE
The details that matter.
Source: AE300 user manual, Table 2-2 (printed pages 9–11). Ratings depend on the selected model and control mode.
04 / PRODUCT CATALOGS
Get the overview first.
Short product guides for a quick look at each series. For installation and exact model ratings, use the full manuals below.
AE300 / AC DRIVES
AE300 product catalog
Features, selection tables and wiring at a glance. This catalog also introduces other DRIVO products.
AE300-01 / SOLAR PUMPS
Solar pump catalog
System layout, product functions, selection tables and connection diagrams in one short guide.
05 / TECHNICAL MANUALS
General-purpose AC drive user manual.
For general-purpose industrial motor control. Find model selection, ratings, installation dimensions, wiring diagrams, parameter settings and troubleshooting for the AE300 series.
BEFORE YOU SELECT
A few useful details.
How do the featured supply options differ?+
The featured S2 model uses a single-phase 220–240 V input with a three-phase output. T2 uses a three-phase 220–240 V supply, while T4 uses a three-phase 380–415 V supply. The selection table specifies a ±15% voltage tolerance. Always check the model nameplate.
What is the maximum output frequency?+
The manual specifies 0–3000 Hz for V/f control and 0–300 Hz for sensorless vector control. The suitable operating frequency also depends on your motor and mechanical system.
Where can I find installation dimensions?+
See Section 2.6 of the user manual for external and installation dimensions, and Chapter 3 for mechanical and electrical installation. Open Section 2.6 ↗